Need help?Do you have a question about the Salus SQ610 Quantum and is the answer not in the manual?
General| Type | Smart Thermostat |
|---|---|
| Temperature Accuracy | ±0.5°C |
| IP Rating | IP30 |
| Installation | Wall-mounted |
| Connectivity | Wi-Fi |
| Display | LCD |
| Power Supply | Battery |
| Battery Type | AA |
| Operating Temperature | 0°C to 40°C |
| Dimensions | 86 x 86 x 11 mm |
| Wireless Range | Up to 30 meters |
| Control | App |
| Compatibility | Salus Smart Home System |
| Temperature Range | 5°C to 35°C |
| Temperature Setting Range | 5°C to 35°C |
Details the product's compliance with relevant EU directives and regulations.
Provides essential safety instructions and warnings for using the thermostat.
Gives a general description of the SQ610 Quantum thermostat and its features.
Lists all items included in the product package.
Guides on the ideal placement for mounting the thermostat for optimal performance.
Illustrates the electrical connections for the SQ610 Quantum thermostat.
Explains the creation and functionality of a ZigBee network.
Details compatibility with various SALUS devices in different operating modes.
Explains the meaning of icons displayed on the thermostat's LCD screen.
Details the function of each physical button on the thermostat.
Guides through the initial power-up, language selection, and pairing preparation.
Overview of the SALUS Smart Home app and its capabilities for controlling the system.
Steps for connecting the thermostat to the UFH wiring centre via the app.
Instructions for pairing the thermostat with a TRV radiator head using the app.
Steps for pairing the thermostat with a Smart Plug SPE600 via the app.
Detailed guide to pair the thermostat with a Smart Relay SR600 using the app.
Instructions for pairing the thermostat as a wired device via the app.
Steps to pair the thermostat with the RX10RF receiver using the app.
Overview of operating the thermostat using the SALUS Smart Home App.
Explains the icons and their functions within the SALUS Smart Home application.
How to rename the thermostat within the SALUS Smart Home app.
Guide on adjusting the thermostat's setpoint temperature using the app.
Instructions for switching between heating and cooling modes with KL08RF.
How to activate and set up the schedule mode for the thermostat.
How to temporarily change the temperature setpoint outside of the schedule.
Instructions for operating the thermostat in manual mode.
Steps to activate and deactivate the thermostat's standby mode.
How to lock and unlock the thermostat's keys using the application.
How to pair and use window/door sensors with the thermostat.
Instructions for pairing the thermostat with a Smart Plug SPE600.
How to pair the thermostat with a Smart Relay SR600.
Using identification mode to find specific devices during pairing.
How to pin or unpin the thermostat to the app dashboard.
User-adjustable settings like calibration and standby temperature.
Advanced configuration options for installers, including system parameters.
How to create and manage OneTouch automation rules.
Explanation of error codes shown in the app and on the thermostat.
How to check the wireless signal quality of connected devices.
Procedure to perform a factory reset and remove the thermostat from the network.
Overview of system setup and configuration without the Smart Home application.
Steps for pairing the UFH wiring centre with the thermostat in offline mode.
Instructions for pairing TRV radiator heads with the thermostat in offline mode.
Steps to pair the RX10RF receiver with the thermostat in offline mode.
How to change the setpoint temperature in manual mode while operating offline.
Programming the thermostat's heating schedule in offline mode.
Temporarily overriding the offline schedule with a new setpoint.
Activating and deactivating the thermostat's standby mode in offline operation.
How to lock and unlock the thermostat keys in offline mode.
How to set the time and date on the thermostat in offline mode.
Setting up the holiday mode for temperature control in offline operation.
Recalibrating the thermostat's internal temperature sensor in offline mode.
Configuring the display of humidity information on the thermostat in offline mode.
Showing or hiding floor temperature readings in offline mode.
Setting the desired temperature for standby mode in offline operation.
Selecting between heating and cooling modes in offline operation.
Restoring user settings to their default values in offline mode.
To Next Page
