Salus SQ610 Quantum - First power up sequence, language choice and preparing to the pair process

10
4.3 First power up sequence, language choice and preparing to the pair process
Now, choose your language by
„ ” or „ ” buttons.
Conrm your language by tick button.
5
To power on the thermostat you
have to connect it to the 230V
power supply then...
...display will show all icons...
...then thermostat will display the
software version.
1 2
3
4
Thermostat work as a standalone device
for pump, boiler, receivers etc. That is, you
can directly connect thermostat to selected
device without any network system. You can
add it later anytime.
NO - STANDALONE.
You can congure your thermostat
with universal gateway or CO10RF
coordinator. That is, add it to the Salus
Smart Home system.
YES - ONLINE, OFFLINE MODE.