Salus SQ610 Quantum - Pairing with Wireless TRV radiator head

15
5.3 Pairing with Wireless TRV radiator head
1
SALUS
SmartHome
Go to SALUS Smart Home app
3
Now thermostat is looking for the
signal from the coordinator...
5
64
Open main menu. Select „Settings”. Now enter to the „Setup Equipment”.
7 8
App has started scanning...
2
For easier installation, please make sure you have already added wireless TRV radiator heads to your ZigBee network (please refer to the wireless TRV
radiator head manual instruction).
Please note:
Press „Scan for equipment” button
9
...Gateway has started ashing red and
searching for the thermostat...
Thermostat is connected. Go to the
Smart Home app to congure it.
Select “YES” by „ ” or „ ”
buttons. Conrm by button.