Salus SQ610 Quantum - Pairing as a Wired Device

21
1
SALUS
SmartHome
Go to SALUS Smart Home app
3
Now thermostat is looking for the
signal from the coordinator...
5
64
Open main menu. Select „Settings”. Now enter to the „Setup Equipment”.
7 8
App has started scanning...
2
5.6 Pairing as a Wired Device
Press „Scan for equipment” button
9
Thermostat is connected. Go to the
Smart Home app to congure it.
...Gateway has started ashing red and
searching for the thermostat...
Select “YES” by „ ” or „ ”
buttons. Conrm by button.