55
After all you will see the main
thermostat’s display.
8. Wired Device (how to set up)
Now, choose your language by
„ ” or „ ” buttons.
Conrm your language by
button.
Select „NO” by
„ ” or „ ” buttons to set
SQ610 Quantum thermostat as a
standalone wired device and conrm
by
button.
5
To power on the thermostat you
have to connect it to the 230V
power then...
...display will show all icons...
...then thermostat will display the
software version.
1 2 3
4
6
Thermostat SQ610 Quantum can work without UGE600 Universal Gateway or CO10RF Coordinator as a standalone device. You can connect it directly
to the boiler, pump or other device which requires volt-free switching or 230V AC power supply. Look at the diagrams at the next page to see how to
connect it.
Please note:
Self-acting SQ610 Quantum thermostat without application support can be easily added to the Smart Home app anytime. All settings made before
adding to the application are automatically copied to the Smart Home app.
To Next Page
Loading...
Need help?
General
