To Next Page

To Previous Page

9.6.5 Display oor temp

Display oor temperature is a function which is available only when thermostat works with external oor temperature sensor.

To show/hide oor temperature value please follow steps below:

Floor temperature value is displayed

with one degree accuracy.

9.6.6 Standby temp setpoint

There are two standby temperature setpoints - for heating and for cooling mode. Standby setpoint range for heating mode is from

5 ° C to 35 ° C. Standby setpoint range for cooling mode is from 5 ° C to 40 ° C. To set it on please follow steps below:

NOTE: If paired with TRV radiator heads or RX10RF receiver, then standby for cooling is not available.

Set temperature

setpoint by or

buttons. Conrm by

button.

Go to the user settings.

Press

button to enter the

main menu.

Choose display oor temp option.

Choose standby temp setpoint option.

Select SHOW or HIDE using

and

buttons. Conrm selection by button.

Go to the user settings.

Press

button to enter the

main menu.

Select for heating or cooling option.

Salus SQ610 Quantum User Manual

Other manuals for Salus SQ610 Quantum