Salus ST103ZB User Manual (English)

Other manuals for Salus ST103ZB

Installation & Operation Manual35 pages

Quick Start Guide2 pages

Questions and Answers:

S
Sarah RiosAug 13, 2025
What to do if Salus Controller displays Error 04 related to room temperature sensor?
- R
  rzimmermanAug 13, 2025
  If the Salus Controller displays Error 04, it indicates an open circuit in the room temperature sensor. Here's what you should do: * If the sensor is set to Internal (Default), replace the thermostat or use an external sensor. * If the sensor is set to External (Settings), and Parameter 12 is set to the external sensor, check the wiring or ensure the sensor is connected. * If the sensor is set to External and Parameter 12 is set to Zigbee remote, follow the "Find & Bind" sequence defined in the IOM.
S
Sarah SmithAug 17, 2025
What to do if Salus Controller displays Error 03 related to room temperature sensor?
- S
  stephensronaldAug 17, 2025
  If your Salus Controller shows Error 03, it means the room temperature sensor circuit is shorted, or the sensor is damaged. To resolve this: * If the sensor is set to External (Settings), and Parameter 12 is set to the external sensor, check for a short circuit. * If the sensor is set to Internal (default), replace the thermostat or use an external sensor.
D
dominicphamAug 21, 2025
What to do if Salus Controller displays Error 02 related to pipe supply sensor?
- S
  Stephanie MccoyAug 21, 2025
  If your Salus Controller displays Error 02, it indicates a shorted or damaged pipe supply sensor. Here's how to address it: * Check the connection of the pipe supply sensor to the terminals. * Check for shorts in the pipe supply sensor leads. * Replace the sensor if necessary.
L
Laura RayAug 25, 2025
How to fix Error 01 on Salus Controller related to pipe supply sensor?
- X
  xhernandezAug 25, 2025
  If your Salus Controller shows Error 01, it means the pipe supply sensor circuit is open, or the sensor is not connected. To fix this, you should: * Check the connection of the pipe supply sensor to the terminals. * Replace the sensor if needed.
J
johnmillsAug 28, 2025
What to do if Salus Microphone system shows Error 04: Room temperature sensor circuit is open?
- B
  burnsbruceAug 28, 2025
  If the Salus Microphone system displays Error 04 related to an open room temperature sensor circuit: * If the sensor is set to Internal (Default), replace the thermostat or use an external sensor. * If the sensor is set to External (Settings), and Parameter 12 (Appendix A) is set to the external sensor, check the wiring or ensure the sensor is connected. * If the sensor is set to External and Parameter 12 is set to Zigbee remote, follow the “Find & Bind” sequence defined in the IOM.
M
Megan GonzalezSep 1, 2025
What to do if Salus ST103ZB Microphone system displays Error 03: Room temperature sensor circuit is shorted?
- M
  melissajenkinsSep 1, 2025
  If the Salus Microphone system displays Error 03 indicating a shorted room temperature sensor circuit or a damaged sensor: * If the sensor is set to External (Settings) and Parameter 12 (Appendix A) is set to external sensor, check for a short circuit. * If the sensor is set to Internal (default), replace the thermostat or use an external sensor.
C
Carolyn HarperSep 4, 2025
What to do if Salus ST103ZB Microphone system displays Error 02: Pipe supply sensor circuit is shorted?
- M
  Mr. Jerry SimpsonSep 5, 2025
  If the Salus Microphone system displays Error 02, indicating a shorted or damaged pipe supply sensor, check the connection of the pipe supply sensor to the terminals, check for shorts in the pipe supply sensor leads, and replace the sensor.
W
Willie JohnsonSep 9, 2025
What to do if Salus ST103ZB displays Error 01: Pipe supply sensor circuit is open?
- A
  Angela GonzalezSep 9, 2025
  If the Salus Microphone system displays Error 01, indicating an open pipe supply sensor circuit or a disconnected sensor, check the connection of the pipe supply sensor to the terminals and replace the sensor.