Salus VS10B - Option 1 - Programmable Thermostat Setup; PRT with no communication

Option 1 - Individual Programmable thermostat setup
VS10W and VS10B Installer Manual 31
Long press to exit
to home screen
or continue to
change device
settings. Refer to
page 33.
Short press on
to back up.
Use to
change to 2.
PRT with no communication*
*Select S03 setting 0 if communication is required for global heat/cool changeover.
Your system must support this and the communication connection must be used. See page 13.
SYSTEM OPTION 1
iT600 VS10W - VS10B Installer - User Manual 022.qxd_Layout 1 07.07.2014 0