30 VS20WRF and VS20BRF Installer Manual
You are now ready to configure the unit using the system parameter
table below.
NOTE: This unit is already pre-configured as a programmable thermostat.
To configure this differently refer to table below and instructions on following pages.
FUNCTION SYSTEM SETTING DEFINITION DEFAULT
USE What does unit Communicate Salus Wiring Centre*
within the Salus SmartHome? Salus radiator valve
UFH
Use or
to select the type of
unit to pair with.
*If you have made an error please
go to page 71. You will see the
following screen.
Installation – System Parameters
INSTALLATION
To Next Page
Loading...
