Sam4s SAP-6600 - Network & Revenue; Revenue Center

Sam4POS 6600/4800II Program Manual v2.1 Program Mode • 199
Network & Revenue
IRC (Inter Register Communications) is defined in the Terminal & Network selection in
the Network & Revenue programming. The IRC uses standard Ethernet communications.
When the IRC is active, all terminals in the system are updated automatically when
program changes are made.
Revenue Center information is also defined here.
1. From the main PROGRAM MODE selection menu, touch NETWORK & REVENUE.
2. The NETWORK & REVENUE selection screen appears; touch the program area you wish
to edit.
Revenue Center
Define the Revenue Center information here as needed.
1. Select REVENUE CENTER from the NETWORK & REVENUE selection menu.