EB 8359-1 EN 27
Decommissioning and removal
9 Decommissioning and
removal
The process is disturbed by interrupting
closed-loop control.
Do not mount the positioner while the pro-
cess is running and only after isolating the
plant by closing the shut-off valves.
9.1 Decommissioning
To decommission the positioner before re-
moving it, disconnect and lock the air supply
and signal pressure.
9.2 Removing the positioner
1. Disconnect the lines for air supply and
signal pressure.
2. To remove the positioner, loosen the
fastening screw on the positioner.
9.3 Disposal
We are registered with the
German national register for
waste electric equipment (stiftung
ear) as a producer of electrical
and electronic equipment,
WEEE reg. no.: DE 62194439
Î Observe local, national and internation-
al refuse regulations.
Î Do not dispose of components, lubricants
and hazardous substances together with
your other household waste.
On request, we can appoint a service pro-
vider to dismantle and recycle the product.
NOTICE
!
Tip
To Next Page
Loading...
