Need help?Do you have a question about the Samson EB 2111 and is the answer not in the manual?
General| Brand | Samson |
|---|---|
| Model | EB 2111 |
| Category | Controller |
| Language | English |
Details severe injury risks from pressure equipment bursting and requires PPE.
Covers risks of damage from incorrect slings, unsuitable media, contamination, and torque.
Explains the information found on the nameplates for Type 2111 and Type 2422 Valves.
Describes the nameplate details for Type 2231 to 2235 Control Thermostats.
Illustrates the placement of nameplates on the regulator components.
Details optional accessories like double adapters, handwheels, extension, and separating pieces.
Presents key specifications like leakage class, temperature range, process medium, and conformity.
Safety warnings and procedures for transporting and lifting the regulator unit.
Recommendations for proper storage to prevent damage, including special notes for elastomers.
Details on work position, pipeline routing, and mounting orientation for proper function.
Outlines leak and pressure testing procedures to verify regulator function.
Procedures for starting systems with non-boiling media, managing pressure.
Instructions on how to set and adjust the desired operating temperature.
Explains the function and indication of the thermostat's safety safeguard.
A table listing common malfunctions, their causes, and recommended corrective actions.
Detailed steps for removing and mounting the control thermostat.
Guidance on obtaining necessary spare parts, lubricants, and tools.
Procedures for safely disconnecting and removing the regulator from the piping system.
Instructions for returning defective devices to SAMSON for repair or exchange.
Specifies torque values for components like the coupling nut.
Contact information and required details for service and repair inquiries.
To Next Page
