Graphite M32 · USB Keyboard Controller
9
9. Function Keys - In PROG mode, the last 11 keys of the keyboard are assigned to numerical
digits (0–9), and ENTER. To Send a program change message, press the PROG button,
then enter the program number by pressing the numbered keys. When the program number
is entered, press the ENTER key to transmit the program number information. The Graphite
M32 will exit the program mode, and the Function keys will transmit note information.
10. Keyboard - 32-note velocity sensitive keyboard.
11. USB Connection - Connect the included USB-mini cable from this port to the USB connec-
tion on a computer to provide power to the keyboard, as well as to send and receive MIDI
data.
Front Panel Controls and Functions
To Next Page
Loading...
Need help?
General
