Need help?Do you have a question about the Samson Graphite MD13 and is the answer not in the manual?
General| Brand | Samson |
|---|---|
| Model | Graphite MD13 |
| Category | Recording Equipment |
| Language | English |
Identifies the product as the Samson Graphite MD13 USB MIDI Controller and the document as a Quick Start Guide.
Instructions to reduce the risk of electric shock by not removing covers and referring servicing to qualified personnel.
Precautions regarding plug use, extension cords, and exposure to rain or moisture to prevent fire or shock.
Information on FCC compliance, device operation, and measures to correct radio or television reception interference.
Instructions for proper disposal of electronic products, avoiding mixing with household waste, and collection systems.
A numbered list of essential safety instructions for operating and maintaining the apparatus, including water and ventilation.
Guidelines for servicing, handling damaged units, and proper unplugging procedures to ensure safe operation.
Details the Graphite MD13 as a compact USB pad controller with 13 pads, assignable knobs, and transport controls.
Instructions for recording serial number, warranty claims, and contacting customer service for servicing requirements.
Highlights 13 velocity-sensitive pads, assignable knobs, crossfader, transport controls, and programmable presets.
Describes octave shift buttons, program change mode, CC mode for trigger pads, and USB plug-and-play functionality.
Lists the Samson Graphite MD13 USB Controller, USB Cable, and Owner's Manual as included system components.
Specifies the minimum operating system requirements for Windows, Mac OS, and Apple iPad to use the controller.
Step-by-step instructions on connecting the Graphite MD13 to a computer or iPad via USB, including hub recommendations.
Guidance on launching DAW software and setting the Graphite MD13 as the MIDI Input and Output device.
Details the 13 velocity-sensitive trigger pads and six assignable knobs, their MIDI capabilities, and preset assignments.
Explains the function of transport buttons, octave up/down, master encoder, and crossfader for music production.
Describes the SHIFT, PROG, CC, and PRESET buttons for changing functions, modes, and recalling presets.
Details the function of the USB connector for power, MIDI data transmission, and receiving MIDI data from a computer.
Explains how to set Control Change, MIDI Channel, and Mode (toggle/momentary) for the trigger pads.
Details MIDI Channel, Control Change, Note/CC#, and Mode settings for knobs, crossfader, master encoder, and transport buttons.
Lists specifications for Trigger Pads, Knobs, Encoder, Crossfader, Transport Controls, Presets, MIDI, and Power.
Provides the physical dimensions (inches and mm) and weight (lbs and kgs) of the Graphite MD13 controller.
To Next Page
