Need help?Do you have a question about the Samson C-Control and is the answer not in the manual?
General| Brand | Samson |
|---|---|
| Model | C-Control |
| Category | Recording Equipment |
| Language | English |
Covers essential safety warnings and cautions for electrical shock and equipment care.
Lists critical instructions for safe operation and maintenance of the unit.
Welcomes the user and provides a general overview of the C•control's purpose and benefits.
Details where to record serial number and date of purchase for warranty and service.
Lists the primary features and capabilities of the C•control unit, including inputs, outputs, and functions.
Identifies and describes each control and function visible on the front panel of the unit.
Details the various input and output connectors located on the rear panel of the unit.
Provides a step-by-step guide for the initial setup and connection of the C•control.
Explains how to connect various stereo sources, such as mixers and recorders, to the C•control inputs.
Details the functionality and connection types for the unit's 2-track line outputs.
Describes the three sets of line level outputs used for connecting studio monitors.
Covers specific speaker outputs, cue output, talkback input, and power connection details.
Explains how to power the unit on/off and assign different input sources to outputs.
Describes the 6-segment LED meter for monitoring input levels and signal clipping.
Details how to use the built-in headphone amplifier and connect headphones for monitoring.
Explains master volume control and how to balance levels between different speaker outputs.
Describes setting speaker C/SUB level and using Mute, Dim, and Mono switches for audio control.
Explains how the speaker assignment switches select and toggle between different monitor outputs.
Details the talkback microphone, its routing options (cue, 2-track), and level control.
Explains how to use an external switch connected to the TALK REMOTE jack for talkback control.
Illustrates a typical studio setup for multitrack vocal recording, showing component connections.
Instructions for safely stacking multiple C•control or C Class units on top of each other.
Guide for installing rubber feet to tilt the unit for better ergonomics and viewing angles.
Provides diagrams for various audio cable connections, including RCA, 1/4", and XLR types.
Lists general performance specifications like frequency response, noise, THD, and details control knob types.
Details function switches, front panel, and rear panel connector types and formats.
Lists specifications for controls, metering, power supply requirements, and physical dimensions.
Step-by-step guide for mounting the C•control unit into a rack using the optional dual rack adaptor.
Illustrates the internal signal flow and connection points of the C•control unit.
To Next Page
