EasyManuals Logo

Samson C-Control User Manual

Samson C-Control
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
C•control Features
The Samson C•control headphone amplifier utilizes the latest technology in gain management design. Here are
some of it’s features:
Speaker and input source selector providing a convenient centralized point for routing and listening to
stereo sources over various monitor speakers.
3-way line level speaker selector providing A/B or A/B plus C switching.
Three 2-track / Stereo Inputs can be used to connect DAT, CD, MINIDISK, sub-mixers, MIDI rigs or any
other stereo line level source.
Four stereo Source switches are used to route any of the connected stereo sources to the monitor out-
put.
Headphone Output with Level control for listening.
Control Room VOLUME knob is used to adjust the overall level of the connected monitor speakers.
SPEAKER 2 VOLUME control is used to level match SPEAKER 1 and SPEAKER 2 so that they are at
the proper level when switched.
Talkback Mic with momentary TALK switch and LEVEL control picks up conversation from the engineer
and/or producer to talent over the CUE output.
TALK TO CUE switch, when engaged, routes the internal TALKBACK microphone to the CUE output
allowing the engineer and/or producer to talk to the talent on the other side of the glass.
TALK TO 2-TR switch, when engaged, routes the internal TALKBACK microphone to the 2-track outputs
allowing the engineer and/or producer to print a cue like “ soda jingle track seven” to the final two-track
mix.
Mono switch is used to check mixes for mono compatibility, and when engaged, all the input sources are
summed to a mono signal.
Mute switch provides a single button to silence all inputs and outputs.
Dim switch, when engaged, will lower the level of all outputs by 20dB.
Main Mix Stereo Input for connecting to main mixing console.
Three speaker Outputs, one 1/4 inch balanced line level and two RCA unbalanced line level output.
Four 2-track/Stereo inputs, three 1/4 inch balanced line level and one RCA unbalanced line level input.
Oversized, rubber bumpers with tilting feet allow several Samson C class units to be stacked and tilted in
an ergonomically correct operating position.
Three year extended warranty.
010
010
010
010
SAMSON
3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Samson C-Control and is the answer not in the manual?

Samson C-Control Specifications

General IconGeneral
BrandSamson
ModelC-Control
CategoryRecording Equipment
LanguageEnglish

Related product manuals