Samson Graphite MD13 - Quick Start Setup; Connecting the Controller; Software Setup

10
Quick Start
1. Connect the Graphite MD13 to your computer or iPad* using the supplied USB
cable. The unit will receive power and transmit MIDI data via the USB connection.
If the Graphite MD13 is connected to a non-powered USB hub, it may not receive
enough power to turn on. It is recommended that you connect the Graphite MD13
directly to your computer or to a powered USB hub.
2. Launch your DAW or virtual instrument software.
3. Set the Graphite MD13 as the MIDI Input and MIDI Output device.
*To connect directly to an iPad, you will need to use the Apple iPad Camera Connection
Kit or Lightning to USB Camera Adapter (not included).
Computer