7
MXS Series Power Amplifiers
Features
• Lightweight, high-power amplifier for performance and installation speaker
configurations:
MXS3000: 2 x 1850 Watts at 2Ω, 2 x 1550 Watts at 4Ω
4600 Watts at 4Ω, 3100 Watts at 8Ω bridged mono
MXS3500: 2 x 2700 Watts at 2Ω, 2 x 1900 Watts at 4Ω
5400 Watts at 4Ω, 3700 Watts at 8Ω bridged mono
• Clean, crisp sound, 0.02% THD, dynamic range of 100 dB, and frequency response
of 20 Hz to 20 kHz, guaranty ultra-clean sound quality
• Independent detent input level controls for each channel allow precision adjustments
• Three-position Mode (Mono, Stereo, Bridge Mono) and Filter (28Hz, Full, 120Hz)
selector switches
• LED signal indicators for each channel continuously display input signals and output
levels
• Four-point protection circuitry (Short Circuit, DC Output, Over Current, Thermal)
• Temperature-sensitive, variable speed fan provides reliable performance without
thermal and overheating problems
• Protection relay circuitry that guards against overheating or faulty wiring conditions
and also prevents “thumps” when powering on or off
• Input connectors for each channel accommodate both balanced XLR or balanced ¼”
TRS plugs
• Output connections are made via binding posts and Speakon® connectors
• The MXS Series power amplifiers can be mounted in any standard 19” rack, making
it easy to integrate the amp into any fixed or traveling PA rig
• Rugged construction makes the MXS Series power amplifiers completely roadworthy
To Next Page
