1. Turn the BLUETOOTH/AUX IN Volume control down counterclockwise to 0.
2. With the RS Loudspeaker and your Bluetooth
device powered on, press the Pair button on the
rear panel of the RS Loudspeaker to make the
speaker discoverable. The Bluetooth indicator
will slowly ash blue.
3. In the settings of your Bluetooth device, set it to
“discover” available devices.
4. From the Bluetooth device list, select the
“Samson BLUETOOTH” device.
5. If your device asks for a passkey, enter digits
0000 (four zeros) and press OK. So
me devices
may also ask you to accept the connection.
6. The RS Loudspeaker speaker indicates that
pairing is complete when the indicator turns
steady blue. You can now stream audio from your
device to the RS Loudspeaker.
7. With the volume control on your Bluetooth device turned up, play some music, and slowly
raise the RS Loudspeaker BLUETOOTH/AUX IN Volume control until you have reached the
desired level.
Bluetooth
®
Pairing
8
USC
To Next Page
Loading...
Need help?
General