4 EB 2173 EN
General safety instructions
1 General safety instructions
– The device must be mounted, started up or serviced by fully trained and
qualied personnel only; the accepted industry codes and practices are to
be observed. Make sure employees or third persons are not exposed to any
danger.
– All safety instructions and warnings given in these mounting and operating
instructions, particularly those concerning installation, start-up, and mainte-
nance, must be strictly observed.
– According to these mounting and operating instructions, trained personnel
refers to individuals who are able to judge the work they are assigned to
and recognize possible dangers due to their specialized training, their
knowledge and experience as well as their knowledge of the applicable
standards.
– The devices comply with the requirements of the European Pressure Equip-
ment Directive 97/23/EC. The declaration of conformity issued for a regula-
tor bearing the CE marking includes information on the applied conformity
assessment procedure. This declaration of conformity can be provided on re-
quest.
– To ensure appropriate use, only use the device in applications where the op-
erating pressure and temperatures do not exceed the specications used for
sizing the device at the ordering stage.
– The manufacturer does not assume any responsibility for damage caused by
external forces or any other external factors.
– Any hazards that could be caused in the temperature regulator by the pro-
cess medium, operating pressure or by moving parts are to be prevented by
taking appropriate precautions.
– Proper transport, storage, installation, operation, and maintenance are as-
sumed.
To Next Page
Loading...
