EB 5573 EN 12-1
Removal
12 Removal
The work described in this chapter is only to
be performed by personnel appropriately
qualiedtocarryoutsuchtasks.
Panel mounting
1. Put the controller out of operation (see
the 'Decommissioning' chapter).
2. Unscrew the top left and bottom right
screws to unfasten the controller housing
from the panel.
Wall mounting
1. Put the controller out of operation (see
the 'Decommissioning' chapter).
2. Unscrew the fastening screws and re-
move the back of the housing from the
wall.
Rail mounting
1. Put the controller out of operation (see
the 'Decommissioning' chapter).
2. Unscrew the top left and bottom right
screws to unfasten the controller housing
from the top-hat rail.