EasyManua.ls Logo

Samson TROVIS 5579 User Manual

Samson TROVIS 5579
182 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Automation System TROVIS 5500
Heating and District Heating Controller
TROVIS 5579
Mounting and
Operating Instructions
EB 5579 EN
Firmware version 1.8x
Edition April 2009
®
Electronics from SAMSON

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Samson TROVIS 5579 and is the answer not in the manual?

Samson TROVIS 5579 Specifications

General IconGeneral
BrandSamson
ModelTROVIS 5579
CategoryController
LanguageEnglish

Summary

1 Operation

1.1 Operating elements

Describes front panel controls like rotary pushbutton and changeover key.

1.2 Operating modes

Describes Day, Night, Automatic, and Manual operating modes.

1.5 Setting the controller time

Step-by-step guide for setting the current time and date on the controller.

1.6 Setting the times-of-use

Instructions for programming daily heating and DHW times-of-use periods.

2 Start-up

2.1 Setting the system code number

Guide to selecting the correct hydraulic schematic configuration number.

2.2 Activating and deactivating functions

Procedure to enable or disable controller functions via function blocks.

2.4 Calibrating the sensors

Steps for adjusting sensor readings to match actual temperatures.

3 Manual operation

4 Systems

5 Functions of the heating circuit

5.1 Weather-compensated control

How flow temperature is controlled based on outdoor temperature using heating characteristics.

5.2 Fixed set point control

How to control flow temperature using constant set points for day and night.

5.3 Underfloor heating/drying of jointless floors

Configuration and operation of the underfloor heating drying function.

6 Functions of the DHW circuit

6.1 DHW heating in the storage tank system

How the controller manages DHW heating using a storage tank.

6.3 DHW heating in instantaneous heating system

How DHW heating is managed in systems without a storage tank.

6.10 Thermal disinfection

Procedure for thermal disinfection of the DHW storage tank to prevent legionella.

7 System-wide functions

7.2 Frost protection

Measures to protect the system from freezing temperatures.

7.4 Return flow temperature limitation

Controlling and limiting the return flow temperature for efficiency.

7.11 Flow rate/capacity limitation in Rk1

Limiting flow rate or capacity based on heat meter or other signals.

7.12 Device bus

Connecting multiple controllers and devices via the device bus.

8 Operational faults

8.1 Error list

A list of error codes, their meanings, and corresponding sections for troubleshooting.

8.2 Sensor failure

How the controller responds to failures of various sensor types.

9 Communication

9.1 RS-232 system bus interface

Setting up communication via RS-232 for PC or modem connections.

9.4 Meter bus interface

Connecting heat and water meters via the meter bus interface.

10 Installation

Panel mounting

Steps for installing the controller in a control panel.

Wall mounting

Steps for mounting the controller on a wall.

Top hat rail mounting

Steps for mounting the controller on a standard top hat rail.

11 Electrical connection

Notes on installing the electrical connections

Important considerations for safe and effective electrical wiring.

Overvoltage protection

Measures to protect the controller from voltage surges.

12 Appendix

12.1 Function block lists

Detailed lists of available function blocks and their parameters for different heating circuits.

12.5 Technical data

Specifications and technical details of the controller's inputs, outputs, and interfaces.

Related product manuals