Need help?Do you have a question about the Samson TROVIS 5573 and is the answer not in the manual?
General| Type | Digital Controller |
|---|---|
| Input signals | Pt100, Pt1000, Thermocouples |
| Output signals | Relays, DC 0/4...20 mA, DC 0...10 V |
| Power supply | 24 V AC/DC ±10% |
| Mounting | DIN rail mounting |
| Communication | Modbus RTU |
| Protection class | IP20 |
| Approvals | CE |
| Control Algorithm | PID |
| Enclosure Rating | IP20 |
Covers risks of fatal injury due to electric shock and precautions.
Details risks of controller damage from voltage, malfunction, and temperature.
Explains the information presented on the device's nameplate.
Lists and describes changes across different firmware revisions.
Describes how to configure the controller using the TROVIS-VIEW software.
Explains the connection and operation with the SAM DISTRICT ENERGY application.
Provides detailed technical specifications for the controller's inputs and outputs.
Shows the physical dimensions and panel cut-out sizes for mounting.
Instructions for checking the shipment upon delivery and reporting damage.
Guidance on safely removing the controller from its packaging.
Provides instructions for protecting the controller during transport.
Details on proper storage conditions to prevent damage.
Specifies work position and requirements for controller installation.
Lists conditions and steps required before starting the installation.
Describes panel, wall, and rail mounting procedures for the controller.
Covers electrical connection safety, wiring notes, and terminal connections.
Explains the function of the rotary pushbutton and rotary switch.
Details available optional interfaces like two-wire bus and Modbus.
Guides on selecting the correct system code number for configuration.
Explains how to activate or deactivate functions using function blocks.
Provides steps for modifying parameter settings within different levels.
Details the procedure for calibrating connected temperature sensors.
Describes how to select and set the controller's operating modes.
Covers setting time, date, and programmable times-of-use.
Explains how to set day and night temperatures for heating and DHW.
Guides on resetting parameters to their factory default settings.
Lists all possible error messages and their corresponding causes or chapters.
Explains how the controller responds to different types of sensor failures.
Describes the temperature monitoring alarm and its configuration.
Explains the error status register and its meaning.
Provides recommended inspection and testing procedures for the controller.
Details the process for updating the controller's firmware.
Step-by-step guide for updating firmware via RS-232.
Instructions for updating firmware using an RS-485 bus connection.
Procedure for updating firmware via an Ethernet connection.
Guide for performing automatic firmware updates on multiple controllers.
Explains the procedure for returning defective controllers for repair.
Details available system configurations and their default settings.
Explains various functions applicable to heating circuits.
Describes functions specific to the Domestic Hot Water (DHW) circuit.
Covers functions that apply across the entire system.
Lists available optional accessories for the controller.
Provides contact information for after-sales support and required details.
To Next Page
