Samson TROVIS 5573 - 6 Operation; 6.1 Operating controls

EB 5573 EN 6-1
Operation
6 Operation
The heating controller is operated on site using the operating controls on the front.
6.1 Operating controls
The operating controls are located in the front panel of the controller.
Rotary pushbutton
*
Rotary pushbutton
Turn [q]:
Select readings, parameters and function blocks.
Press [Û]:
Conrmadjustedselectionorsettings.
Rotary switch
The rotary switch is used to set the operating mode and the relevant parameters for each
control circuit.
Information level, normal switch position
Operating modes
Manual level
Day set point (rated room temperature, DHW temperature)
Night set point (reduced room temperature, DHW tempera-
ture sustaining value)
Times-of-useforheating/DHW
Party mode
Controller time
Parameterandcongurationlevel