Samson TROVIS 5573 - 9 Malfunctions; 9.1 Error list

EB 5573 EN 9-1
Malfunctions
9 Malfunctions
A malfunction is indicated by the blinking icon on the display. Additionally, the display is
illuminated for one second every 10 seconds. The 'Error' message appears. Press the rotary
pushbutton to open the error level. Turn the rotary knob to read the error or possibly more.
As long as an malfunction exits, the error message is included in the reading loop, even
when it has not been opened by pressing the rotary pushbutton.
Intheerrorlevel,theerrormessageisdisplayedasspeciedinthefollowinglist(seeChap-
ter9.1).
After the system code number has been changed or after restarting the controller, any error
messages are suppressed for approx. three minutes.
9.1 Error list
Err1=Sensorfailure(seeChapter9.2)
Err2=Reserved
Err3=Disinfectiontemperaturenotreached(seeAppendixA)
Err4=Max.chargingtemperaturereached(seeAppendixA)
Err5=Reserved
Err6=Temperaturemonitoralarm(seeChapter9.3)
Err7=Unauthorizedaccessoccurred
Err8=Errormessageofabinaryinput
Allerrormessages,exceptforErr1canbeconrmedintheerrorlevel.
Conrming error messages
1. Select Clr [q].
2. Conrmerrormessage[Û].
Note