This function protects a displayed image from sticking when the same image is
displayed for an extended period of time.
PixelShift On : 0x01 for EEPROM 0x2E
PixelShift Off : Others
Please see the below figure for movement path. It takes 4 minutes for 1-step movement.
(32 steps = 128 minutes)
Location is reset when : Power is On or Off.
Image mode is changed.
User operates a key.
Location is not reset in Service Menu.
❇ Note : When position is set to the minimum or maximum, it does not move smaller or larger.
4 Alignments and Adjustments
DI19PS
4-5
Figure 4-15.
To Next Page
Loading...
