4 Alignments and Adjustments
4-4 DI19PS
Figure 4-12.
4-5-3 How to Abjust SVC Function OSD
• Always adjust SVC Function OSD after replacing any panel or lamp.
• Panel Replacement
After replacing a panel, press the key and hold until Panel is selected. Press Panel shortly again. Ch.No
of the Panel increases by 1 while panel time information (Time(Hr)) changes to '0'. At the same time,
other information (U Lamp, L Lamp) changes to '0'.
4-5-4 How to Adjust PixelShift
1. PixelShift : On <-> Off
Figure 4-13.
Figure 4-14.
To Next Page
Loading...
