32
9-2 Rear
1. Power port
Connect the power cord for your monitor to the power port on the back of the monitor.
2. D-sub 15-pin port
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. Audio port
Connect the audio cord for your monitor to the audio port on the back of the monitor
4. Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place.
(The locking device has to be purchased separately. )
To get the information on using the Kensington Lock, contact an aurhorized dealer
1
2
To Next Page
Loading...
Need help?
General