Installing the wind bae
If you operate the cooling operation of air conditioner in the condition where ambient temperature is lower than 23 °F
DB(Dry bulb), or the outdoor unit might be faced with strong wind directly, the wind bae should be installed to prevent the
outdoor unit fan from operating in reverse way.
<Front View>
22.6 inch
0.5 inch
Partition
Make holes on the front side and
attach the wind bae using screws.
<Top Down View>
“A” – Should be 7 7/8” or longer
"A"
CAUTION
t When attaching the wind bae using screws, be careful that the screws do not damage the partition.
t Install outdoor units with the back surface facing wall side to eliminate the eects of external wind.
NOTE
English-30
To Next Page
Loading...
