41
13. Installation
13-2. Outdoor unit
Between Indoor unit and Outdoor unit Connection Cable Specifications(Common in use)
ťͱиʪθϑЇΧΧц
AͱЇʀɇϩͱAɇɵʪ
ťͱиʪθϑЇΧΧц đɇуࢥđ࣍Ǥ࣎
ÃʒͱͱθťͱиʪθAɇɵʪ
ߢעࡡߣߡߩߣߤߡǤࡡߧߡ²і ±10% ߡࢋߡߡߤߪࠟࡡߤиθʪϑ ߡࢋߡߡߢߢߡࢋߡߡߣߤࠟࡡߣиθʪϑ
• Power supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed flexible cord.
(Code designation IEC:60245 IEC 57 / CENELEC: H05RN-F or IEC:60245 IEC 66 / CENELEC: H07RN-F)
When installing the indoor unit in a computer room or net work room, use the double shielded
(Tape aluminum / polyester braid + copper ) cable of FROHH2R type.
1-phase terminal block spec
AΧͱиʪθࡠđߦϑʀθʪи AͱЇʀɇϩͱࡠđߥϑʀθʪи
1(L) 2(N)
N
L
0.59 0.47
0.40
0.45
1 (L) 2 (N) L N
INDOOR POWER OUTDOOR POWER
Wiring Diagram of Power Cable
When using ELB for 1 phase
ELB
MCCB
MCCB
1(L) 2(N)
N
L
L1 L2 L1 L2
Power Supply
Electrical component box
Indoor Unit
Indoor
Power
Communication cable
Main power cable
Cable
clamp
Cable
tie
The appearance of the unit may be different from the picture depending on the model.