To Next PageTo Next PageHow to troubleshoot error on discharge temperature sensor of compressor 1 in Samsung Air Conditioner?
If your Samsung Air Conditioner is showing an error related to the discharge temperature sensor of compressor 1, indicating a short or open circuit, you should check the discharge sensor for any open or short conditions.
Why my Samsung Air Conditioner does not operate at all?
Your Samsung Air Conditioner might not be operating because the power plug isn't properly connected. Ensure it's securely plugged in. Also, check if the auxiliary power switch (MCCB, ELB) is turned on. If it's off, the air conditioner won't work even if you press the power button. Remember to turn the auxiliary power switch on 6 hours before starting operation after an extended period of disuse. If the air conditioner is turned off by the Timed off function, turn it on again by pressing the power button.
How to fix communication error between the outdoor unit and main micom on Samsung AC026NNNDKH?
If you encounter a communication error between the outdoor unit and the main micom on your Samsung Air Conditioner, especially on PF #4 to #6 controllers, you should check the electrical connection and setting between the indoor unit MAIN PBA and the INVERTER PBA.
What to do if there is a communication error between indoor and outdoor unit of Samsung AC026NNNDKH?
If there is a communication error between the indoor and outdoor units of your Samsung Air Conditioner, particularly if there's no response from the indoor units after tracking, the suggested solution is to check the electrical connections and settings between the indoor and outdoor units.
What to do if I cannot set both indoor unit addresses and installation options in my Samsung AC026NNNDKH?
If you're unable to set both the indoor unit addresses and the installation options, set each of them individually.
Why my Samsung AC026NNNDKH Timed on/off function does not operate?
The Timed on/off function on your Samsung Air Conditioner may not be working because you haven't pressed the SET button on the remote control after setting the on/off time. Make sure to set the on/off time.
Why my Samsung Air Conditioner temperature does not change?
The temperature on your Samsung Air Conditioner may not be changing because it could be running in Fan mode. In Fan mode, the air conditioner controls the set temperature automatically, and you cannot change it.
Why does water drops from the piping connections of the outdoor unit of my Samsung AC026NNNDKH?
Condensation may develop on the piping connections of the outdoor unit of your Samsung Air Conditioner due to temperature differences. This is a normal condition.
Why warm air does not come out of the Samsung AC026NNNDKH?
Warm air may not be coming out of your Samsung Air Conditioner if the outdoor unit is designed for cooling only. In this case, warm air won't come out even if you select the Heat mode. Also, ensure that the remote control supports both cooling and heating. If it doesn't, use a remote control that does.
Why is my Samsung Air Conditioner not cool or warm enough?
If your Samsung Air Conditioner isn't cooling or warming enough, check the set temperature. In Cool mode, if the set temperature is higher than the current temperature, cool air won't come out. Press the Temperature button to set it lower (minimum 18°C). In Heat mode, if the set temperature is lower than the current temperature, warm air won't come out. Press the Temperature button to set it higher (maximum 30°C).
General| Model | AC026NNNDKH |
|---|---|
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Air Flow Rate (Cooling) | 12.5 m³/min |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Air Flow (High) | 12.5 m³/min |
