7-3
SW update
How to update the Micom(RS485)
(cont.)
t
SW Update of the hardware boards have always been critical operations.In order to reduce the time,increase usability
and more on top of reliability of having the SW update successfully.
t
A/C SW update enables the engineer to update the SW of indoor , outdoor and MCU boards when the S-Net Pro2 is in normal
communication mode.
t
This feature is applicable in the Live Mode only.
Step 3
Opening "A/C Unit SW Update" dialog
Click [Add-On] in ribbon toolbar. Select [A/C Unit SW Update] button when S-Net Pro2 is connected to serial port or on replay mode.
▶ Procedure
1. Select the type of device from the drop down [Indoor/ Outdoor/ MCU/Onoff Controller/PIM/SIM/PEAK/PowerDivider].
To Next Page
Loading...
