Troubleshooting
4-2
Steps Remote control display
1
Set the SEG2 and SEG3 values:
a
Set the SEG2 value by pressing the (Low Fan) button repeatedly until the
value you want to set appears on the remote control display.
b
Set the SEG3 value by pressing the (High Fan) button repeatedly until the value you want
to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the
following order:
SEG 2
SEG 3
2
Press the (Mode) button. Cool and On appear on the remote control display.
3
Set the SEG4 and SEG5 values:
a Set the SEG4 value by pressing the
(Low Fan) button repeatedly until
the value you want to set appears on the remote control display.
b Set the SEG5 value by pressing the (High Fan) button repeatedly until
the value you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the
following order:
SEG 4
SEG 5
4
Press the (Mode) button. Dry and On appear on the remote control display.
5
Set the SEG6 and SEG8 values:
a Set the SEG6 value by pressing the
(Low Fan) button repeatedly until
the value you want to set appears on the remote control display.
b Set the SEG8 value by pressing the
(High Fan) button repeatedly until
the value you want to set appears on the remote control display.
When you press the (Low Fan) or (High Fan) button, values appear in the
following order:
SEG 6
SEG 8
6
Press the (Mode) button. Fan and On appear on the remote control display.
4-1-2. The procedure of setting option
To Next Page
Loading...
