Samsung AC071MN4PKH - Page 48

Troubleshooting
4-8
The procedure of setting option
Steps Remote control display
1 Set the SEG2 and SEG3 values:
a
Set the SEG2 value by rotating the Wheel counterclockwise until the
value you want to set appears on the remote control display.
b Set the SEG3 value by rotating the Wheel clockwise until the value
you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
SEG 2
SEG 3
2 Press the (Mode) button. Cool and On appear on the remote control display.
3 Set the SEG4 and SEG5 values:
a Set the SEG4 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG5 value by rotating the Wheel clockwise until
the value you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
SEG 4
SEG 5
4 Press the (Mode) button. Dry and On appear on the remote control display.
5 Set the SEG6 and SEG8 values:
a Set the SEG6 value by rotating the Wheel counterclockwise until
the value you want to set appears on the remote control display.
b Set the SEG8 value by rotating the Wheel clockwise until
the value you want to set appears on the remote control display.
When you rotate the Wheel, values appear in the following order:
SEG 6
SEG 8
6 Press the (Mode) button. Fan and On appear on the remote control display.