To Next PageTo Next PageWhat to do when Samsung Heating System OUTDOOR UNIT is under protection due to overload?
If the outdoor unit of your Samsung Heating System is under protection due to overload, check the cycle status. Also, check the compressor when it starts.
What to do if Samsung Heating System detects OUTDOOR UNIT compressor freezing?
If your Samsung Heating System detects outdoor unit compressor freezing, check the cycle status, specifically if the outdoor unit (condenser) is frozen. Inspect the condenser.
What to do for indoor unit address setting error in Samsung Heating System?
If you encounter an indoor unit address setting error on your Samsung Heating System, check the address setting of the indoor units.
How to resolve [Inverter] compressor rotation error in Samsung Heating System?
If your Samsung Heating System reports an inverter compressor rotation error, check the compressor connection status and the resistance between different phases of the compressor.
What to do when Samsung Heating System compressor goes down due to high pressure?
If the compressor shuts down due to high pressure in your Samsung Heating System, check the cycle status.
How to fix indoor unit communication error on Samsung Heating System?
To address an indoor unit communication error in your Samsung Heating System: * Check the communication cable of the indoor unit. * Check the DC output voltage at the communication terminal.
How to troubleshoot outdoor fan 2 error on Samsung Heating System?
If your Samsung Heating System displays an outdoor fan 2 error, check the input power connection status. Verify the connection status of the motor and the outdoor unit PCB. Also, check the indoor/outdoor unit fuse.
How to fix [Inverter] compressor startup error in Samsung Heating System?
If you're experiencing a compressor startup error on your Samsung Heating System, check the compressor connection status. Also, check the resistance between different phases of the compressor.
How to troubleshoot outdoor fan 1 error on Samsung Heating System?
If your Samsung Heating System is showing an outdoor fan 1 error, you should check the input power connection status. Verify the connection status between the motor and outdoor unit PCB. Also, inspect the indoor/outdoor fuse.
How to fix [Inverter] total current error/ PFC over current error in Samsung Heating System?
If your Samsung Heating System is showing an inverter total current error or PFC over current error, begin by checking the input power. Next, verify the coolant charging status. Finally, ensure that the outdoor fan is operating normally.
General| Type | Heat Pump |
|---|---|
| Noise Level (Outdoor) | 50 dB(A) |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R410A |
| Cooling Capacity (kW) | 3.5 kW |
| Cooling Capacity | 3.5 kW |
| Heating Capacity (kW) | 4.0 kW |
| Heating Capacity | 4.0 kW |
Guidelines for performing service, including part replacement and connections.
Troubleshooting steps related to error codes displayed on the wired remote controller.
Troubleshooting specific to the tank integrated hydro unit and hydro unit.
Further troubleshooting based on specific symptoms and error codes.
Wiring diagrams for the tank integrated hydro unit and hydro unit.
Wiring diagrams for the outdoor unit.
