To Next PageTo Next PageWhat to do when Samsung Heating System OUTDOOR UNIT is under protection due to overload?
If the outdoor unit of your Samsung Heating System is under protection due to overload, check the cycle status. Also, check the compressor when it starts.
What to do if [Inverter] IPM over current error occurs in Samsung Heating System?
If you are encountering an IPM over current error on your Samsung Heating System, verify the coolant charging status. Also, check the compressor connection and ensure it's operating normally. Inspect for any obstructions around the indoor and outdoor units. Confirm that the outdoor unit service valve is open and that the indoor/outdoor installation pipe and wiring are correctly installed.
What to do for indoor unit address setting error in Samsung Heating System?
If you encounter an indoor unit address setting error on your Samsung Heating System, check the address setting of the indoor units.
How to resolve [Inverter] compressor rotation error in Samsung Heating System?
If your Samsung Heating System reports an inverter compressor rotation error, check the compressor connection status and the resistance between different phases of the compressor.
What to do when Samsung Heating System compressor goes down due to high pressure?
If the compressor shuts down due to high pressure in your Samsung Heating System, check the cycle status.
How to fix indoor unit communication error on Samsung Heating System?
To address an indoor unit communication error in your Samsung Heating System: * Check the communication cable of the indoor unit. * Check the DC output voltage at the communication terminal.
How to troubleshoot outdoor fan 2 error on Samsung Heating System?
If your Samsung Heating System displays an outdoor fan 2 error, check the input power connection status. Verify the connection status of the motor and the outdoor unit PCB. Also, check the indoor/outdoor unit fuse.
How to fix [Inverter] compressor startup error in Samsung Heating System?
If you're experiencing a compressor startup error on your Samsung Heating System, check the compressor connection status. Also, check the resistance between different phases of the compressor.
How to troubleshoot outdoor fan 1 error on Samsung Heating System?
If your Samsung Heating System is showing an outdoor fan 1 error, you should check the input power connection status. Verify the connection status between the motor and outdoor unit PCB. Also, inspect the indoor/outdoor fuse.
How to fix [Inverter] total current error/ PFC over current error in Samsung Heating System?
If your Samsung Heating System is showing an inverter total current error or PFC over current error, begin by checking the input power. Next, verify the coolant charging status. Finally, ensure that the outdoor fan is operating normally.
Describes safety and best practices during service operations.
Details measures to prevent damage from static discharge and PL.
Outlines essential safety measures to prevent hazards and injury.
Covers safe handling and disposal of refrigerants.
Provides guidelines for safe and effective brazing procedures.
Details safe practices for refrigerant charging.
Describes the main characteristics and benefits of the Eco Heating System.
Highlights specific advantages of the EHS SPLIT model.
Lists detailed technical specifications for various units.
Details specifications for optional accessories and parts.
Lists essential hand tools required for disassembly and reassembly.
Provides step-by-step instructions for servicing the hydro unit.
Offers detailed procedures for disassembling the outdoor unit.
Lists error codes and solutions for wired remote controller issues.
Guides users through diagnosing issues based on observed symptoms.
Addresses specific errors and troubleshooting steps for hydro units.
Provides a checklist of items to verify before starting detailed troubleshooting.
Offers further troubleshooting guidance based on system symptoms.
Illustrates the PCB layout for hydro units with component identification.
Shows PCB layouts and component identification for outdoor units.
Provides detailed wiring schematics for hydro units.
Displays wiring diagrams for outdoor unit components and connections.
An index to help find information based on the model name.
Provides a system diagram and part list for split hydro units.
Offers a system diagram and part list for mono hydro units.
Details the system diagram and components for split hydro units.
Guides on checking and updating FSV data using specific software.
Explains the process for exporting and importing FSV values.
General