Samsung Electronics 3-75
PAC
- AM145FNPDBH1
Direction of
disassembly
No Parts Procedure Remark
1 Front View 1) Stop the operation of the air conditioner
and disconnect the main power supply.
2 ASS’Y INLET PART 1) Open the ASS’Y INLET and separate the
safety clips.
(If there is a dust collector in the ASS’Y
INLET, separate the connector wire as well.)
3 ASS’Y MAIN PCB
PART
1) Remove the 1 screw which is fixed to
COVER-MAIN PCB. (Use +Screw Driver)
2) Remove the 1 screw on the upper part
of GUIDE-BELL MOUTH and separate the
GUIDE-BELL MOUTH in a counter clockwise
direction. (Use +Screw Driver)
To Next Page
Loading...
