Troubleshooting
4-100 Samsung Electronics
4-4-66 Fan lock error
Outdoor unit display
(FAN PCB(FAN1))
(FAN PCB(FAN2))
Judgment Method
Is checked symptoms by phase current of Fan Motor.
Cause of problem
Fan Motor connection error.
Defective Fan
Defective PCB
Power On and then Commissioning
Power Off
Replace Fan PCB
Ye s
Did the error occurs?
End of Service
No
Ye s
Did you check
the foreign objects on the Fan
rotary wing?
Remove the foreign objects and restart.
No
Ye s
Fan do rotate by hand?
Replace Fan Motor
No
No
If you rotate the fan by hand,
the noise occurs?
Replace Fan Motor
Ye s
Ye s
Connection wire of
Fan Motor did confirmation?
(Check the connection status of
the Fan1 and Fan2.)
Check the connection status, and then restart.
No
1.
Cause of problem