3-104 Samsung Electronics
No Parts Procedure Remark
2 Drain Pan& Drain
Pump
1)Disassemble the Cabinet Bottom Evap.
- Unscrew 7 screws.
2)Pull the Drain Pan Out.
3) Disassemble the drain Pump.
- Unscrew 5 screws and disassemble 2 conectors.
3 EVAP 1)Disassemble the Support Evap.
- Unscrew 1 screws
2)Disassemble the Cover Pipe.
- Unscrew 2 screws
3) Disconnect the wire between assy control
out and Evap. (TEMP sensor, EEV)
To Next Page
Loading...
