Disassembly and Reassembly
136 Samsung Electronics
No Parts Procedure Remark
2) Disassemble the Bracket Outlet Sub that fixes the
Drain Pan equipped on the front of the set.
– Unscrew 6 screws
3)
Disassemble the Drain Cushion from the
set.
3 Ass'y Evap
The Evaporator should be disassembled after
disassembling the Cover Control 1-3) and the
Drain Pan 2-1), 2-2), 2-3).
1)
Disassemble the Cover Pipe that fixes the high/
low pressure Pipe.
– Unscrew 2 screws
2)
Disassemble the refrigerant temperature sensor,
Inlet air temperature sensor, and EEV wire that
connected to the inside of PCB.
To Next Page
Loading...
