Disassembly and Reassembly
Samsung Electronics 137
No Parts Procedure Remark
3) Disassemble the Support Evap. LF that fixes the
Evaporator.
– Unscrew 2 screws
4)
Disassemble the Support Evap RH.
– Unscrew 2 screws
5) Disassemble the Evaporator form the set.
4 Ass'y Control In
The Control In should be disassembled
after disassembling the Cover Control
1-3).
1)
Disassemble all Control Wires connected to the
inside of PCB.
2)
In case of disassembling the PCB separately,
disassemble the PCB from the case with pushing
the hook after unscrewing the screw.
– Unscrew 1 screw
To Next Page
Loading...
