Disassembly and Reassembly
Samsung Electronics 3-15
No. Parts Procedure Remark
15 ASSY TUBE-4WAY
VALVE
1) Separate 2 weld points by using a welder.
(4way valve to Assy cond)
2) Separate 2 weld points by using a welder
(1.scution tube to comperessor.
2.tube vapor to comperessor.)
3) Remove 3 screws refer to the picture.
- After ewmove screw on bracket valve,
need to pall up it from patition
To Next Page
Loading...
