Disassembly and Reassembly
36 Samsung Electronics
No. Parts Procedure Remark
12 Exhaust pipe 1) Drained of the refrigerant
inside the machine.
2) Separate 2 parts of the pipe
using a welder.
When separating the compressor,
heat exchanger, and pipeline using
welding, all refrigerants in the Units
must be released in advance .
13 Oil separator 1) Separate 3 parts of the pipe
using a welder.
2) Unscrew and remove 2 mounting
screws in oil separator.
(Use + Screw Driver.)
To Next Page
Loading...
