17
Drain pipe and Drain hose Installation (Continued)
Drain pan
Prepare a little water about 2 liters.
Pour water into the drain pan in the indoor unit as shown in figure.
1
When the drain pump is installed, operate the unit as cooling mode and check a
drain pump pumping.
3
Testing the drainage
Confirm that the water flows out through the drain hose.
2
Reassemble the cover of water supply intake.
6
Check drain water drops at the end of the drain pipe.
4
Make sure there is no water leak at the drainage.
5
Drain pipe
Drain water drops
The designs and shape are subject to change
according to the model.
NASA_Big Duct_AM@@@FNHDEH@_IM_EN_03653A-06.indd 17 2016-12-01 오후 3:06:54
To Next Page
Loading...
