36
To complete the installation, perform the following checks and tests to ensure
that the air conditioner operates correctly.
1
Check the followings.
Strength of the installation site
Tightness of pipe connection to detect a gas leak
Electric wiring connections
Heat-resistant insulation of the pipe
Drainage
Earth conductor connection
Correct operation (follow the steps below)
After finishing the installation of the air conditioner, you should explain the
following to the user. Refer to appropriate pages in the User’s Manual.
1
How to start and stop the air conditioner
2
How to select the modes and functions
3
How to adjust the temperature and fan speed
4
How to adjust the airow direction
5
How to set the timers
6
How to clean and replace the lters
When you complete the installation successfully, hand over the
User’s Manual and this Installation Manual to the user for storage
in a handy and safe place.
Note
Final Checks and User Tips
NASA_Big Duct_AM@@@FNHDEH@_IM_EN_03653A-06.indd 36 2016-12-01 오후 3:07:01
To Next Page
Loading...
