Samsung AM280KXVAGH/EU - Page 11

Product Specications
2-4 Samsung Electronics
Changes in comparison to basic mode (cont.)
Changed
part
Changed item
and feature
Basic (DVM S)
Main PCB
Change Main PCB
- Separation for load / control.
- Option resistance delete by model.
(standardization)
- When do PCB replace, need option download.
Hub PCB
Hub PCB newly application
- Separation for load / control.
- Enhanced fixing of load / sensor wire.
FAN PCB
Use controller of 3 phase power
- Prevented phase unbalance.
- Temperature protection of IPM.
Inverter PCB
(Compressor
Control PCB)
Applied inverter Compressor
- Refrigerant cooling method
- Mount power relay on PCB
EMI PCB
3 phase power EMI PCB
- Fuse mount
Communication
Terminal block
- Mount communication terminal block on PCB
 AM080/100/120/140/160/180/200/220JXVSSS
 AM080/140/160MXVAFC
 AM080/100/120/140/200/220/240MXVAGC