Selecting Dry Mode
Select Dry mode if you want to dehumidify your room.
You can adjust the temperature in this mode.
1
Press the (On/Off) button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the button on the remote control until is displayed.
Result
:
The indoor unit beeps each time you press the button.
The air conditioner runs in the Dry mode.
Note You can change modes at any time.
3
Press the button to adjust the temperature until the required
temperature is displayed.
You can set the temperature between 16°C and 30°C.
Result
:
Each time you press the button:
- The temperature adjusts by 1°C
- The indoor unit beeps
The air conditioner starts dehumidifying and the fan speed
adjusts automatically.
4
To control the airflow direction, refer to page 21.
To Next Page
Loading...
Need help?
General
