Selecting the Energy Saving Function
Selecting Mode
Temperature changes in mode
To prevent excessive cooling/heating during sleep, the mode automatically modifies
the temperature setting in accordance with the time setting. Temperature and air current change
according to the three stages; Falling asleep, Sound sleep, and Waking up from
mode,
and then the air conditioner will automatically turn off when the set time has elapsed.
Three stage
prevents you from having difficulty sleeping on extremely hot/cold nights.
Falling asleep : Eases you into sleep by dropping the temperature.
Sound sleep : Relaxes your body and raises your temperature slightly.
Waking up from mode :
Allows you to wake up to comfortable crisp air making you feel refreshed and energized.
• Set the Off timer in mode for more than 5 hours. Sleep may be disturbed if the
mode is set for too short or too long a time because the temperature changes are
set to an 8-hour cycle
.
• If the mode is set for less than 4 hours, the operation will stop at the set time.
If the
mode is set for over 5 hours, the last hour will run in Waking Up stage before
shutting off.
• Recommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for
heating.
Cool mode
Heat mode
Time(hr.)
Set temperature
Temp.
When the 8-hour cycle
completes, this section
repeats
.
Time(hr.)
Temp.
When the 8-hour cycle
completes, this section
repeats
.
Set temperature
To Next Page
Loading...
Need help?
General
