Setting the On Timer
You can set the On Timer to turn on the air conditioner automatically at
the appointed time within a range of 30 minutes to 24 hours.
1
Press the button until the desired time is displayed to set the On Timer.
You can set the time between 0.5 hour and 24 hours.
2
Press the button to complete the setting.
Result
:
The remaining time is displayed.
The timer indicator stops blinking.
The selected mode and the temperature on the display
disappear after 10 seconds.
The air conditioner turns on automatically at the appointed
time and the On Timer setting disappears.
3
Press the button until the desired mode is displayed at the top of
the remote control to select the mode in advance.
Result
:
The air conditioner operates in the selected mode when it is
turned on.
To Cancel the On Timer
If you no longer wish to use the On Timer that you have set, you can
cancel it at any time.
1
To cancel the On Timer, press the button one or more times until the
timer setting disappears.
2
Press the button.
Note
If you want to turn on the air conditioner before the timer
reaches the setting time, press the
button.
To Next Page
Loading...
Need help?
General
