Selecting the Turbo Function
You can select the Turbo Function if you want to cool or heat your room as quickly
as possible. The Turbo function operates for 30 minutes with the maximum settings
before returning automatically to the mode and temperature previously selected.
1
Press the (On/Off) button.
Result:
The operation indicator on the indoor unit lights up.
The air conditioner starts up in the mode you selected last.
The indoor unit beeps.
2
Press the button.
Result:
The temperature and fan settings are adjusted automatically.
The air conditioner cools or heats the room as quickly as
possible.
After 30 minutes, the air conditioner is reset automatically to
the previous setting.
You can select the Turbo function in Auto, Cool and Heat mode.
If you select this function in Dry or Fan mode, the mode
changes to Auto mode.
3
Press the button again to stop the Turbo Function before the end of the
30-minute period.
Result: The air conditioner is reset automatically to the previous setting.
4
To control the airflow direction, refer to page 21.
To Next Page
Loading...
Need help?
General
